Cadastral Surveying 2
Question 3
Describe the specifications of beacons under the following special circumstances;
(a) If the corner point falls on soft or sandy ground;
(b) If it is not possible to drive the peg into the ground due to the presence of rock;
CAS610S
(c) If the corner point falls on hard ground where a peg cannot be driven to the prescribed depth.
[6]
Question 4
Outline any two guidelines for placing reference marks (regulation 20) in the survey of new townships and
extensions to new townships.
[4)
Question 5
(a) Which numerical data shall a diagram contain? (Any four types)
(4)
(b) State six cases when it shall not be necessary to define any corner point by a beacon
(12)
(c) How is the area/size of a consolidated diagram compiled without a resurvey calculated?
(2)
(d) State all cases in which the Surveyor General can issue a certified copy of a general plan or diagram
without the written consent of the land surveyor.
(5)
(e) What are the requirements for survey records when the survey involves the replacement of
beacons into coordinate positions previously established on the trigonometrical system?
(2)
Second Opportunity Examination
Page 3 of 4
JULY2022