,,
(i.) How much bandwidth is available per cell using FDD?
[5]
a)
(ii.) How many users per cell can be supported using FDMA?
[5]
(iii.) What is the cell area?
[5]
b) If the available spectrum is divided into 35 channels and TDMA is
employed within each channel:
What is the bandwidth and data rate per channel?
[5]
Q4 a)
b)
Q5 a)
b)
c)
With the help of an appropriate diagram, explain the basic steps of Mobile
terminated call (MTC) i.e., needed to connect a calling station with a (12]
mobile user when the calling station is in a different GSM network.
[Each correct steps = 1 Mark]
With the help of an appropriate diagram discuss how authentication is
achieved in a GSM network.
[8]
[Correct event in diagram = !Mark]
[Correct statements =!Mark]
Describe how CSMA/CA solves the Hidden and Exposed terminals [6]
problems.
Calculate the maximum distance between the cell site and mobile if the [4]
Guard time is 123 µsand the electromagnetic radio waves propagate at
the speed of light (c= 3x105 km/s).
Draw and explain GSM structuring of time using a frame hierarchy.
[10]
Q6 a)
b)
c)
Write three differences between UTRAN and eUTRAN?
[6]
Sketch and explain E-UTRANarchitecture.
[8]
If a total of 33 MHz of bandwidth is allocated to a particular FDD cellular [6]
telephone system which uses two 25 kHz simplex channels to provide full
duplex voice and control channels, compute the number of channels
available per cell if a system uses
(i). One-cell reuse
(ii). four-cell reuse
(iii). seven-cell reuse
GOOD LUCK!
3