BLM322S - BUS LOGIDTICS AND SUPP CHAIN MANAGEMENT - 2ND OPP - JAN 2020


BLM322S - BUS LOGIDTICS AND SUPP CHAIN MANAGEMENT - 2ND OPP - JAN 2020



1 Page 1

▲back to top


|
NAMIBIA UNIVERSITY
al
-
OF SCIENCE AND TECHNOLOGY
Faculty of Management Sciences
Department of Management
13 Storch Street
Private Bag 13388
Windhoek
NAMIBIA
T: +264 61 207 2220
F: +264 61 207 9220
E: dml@nust.na
W: www.nust.na
QUALIFICATION : BACHELOR OF BUSINESS MANAGEMENT
QUALIFICATION CODE: 07BBMA
COURSE: BUSINESS LOGISTICS AND SUPPLY CHAIN
MANAGEMENT
SESSION: JANUARY 2020
DURATION: 3 HOURS
LEVEL: 7
COURSE CODE: BLM322S
PAPER: THEORY
MARKS: 100
24 OPPORTUNITY EXAMINATION QUESTION PAPER— JANUARY 2020
EXAMINER: DR ASA R. ASA
MODERATOR: MR. MATHEW NELENGE
THIS QUESTION PAPER CONSISTS OF 6 PAGES
(INCLUDING THIS FRONT PAGE)
INSTRUCTIONS
Answer all questions.
Read all the questions carefully before answering.
Marks are indicated at the end of each question/section.
Please ensure that your writing is legible, neat and presentable.

2 Page 2

▲back to top


SECTION A
[40 MARKS]
QUESTION 1: MULTIPLE CHOICE QUESTIONS [2 x 20 = 40]
1. Supply chain management includes the integration of:
a) Suppliers
b) Manufacturers
c) Customers
d) Both a) and c)
e) All ofa), b) and c)
Which of the following is NOT a transformed resource?
a) Raw materials
b) Information
c) Customers
d) Capital
e) All of the above are included
Supply chain management includes all logistics management activities as well as ...
a) Manufacturing operations and sales (applied marketing).
b) Materials management and physical distribution.
c) Procurement and sales.
d) Procurement and manufacturing operations.
e) Manufacturing operations and sales.
The aspects of logistics management that relate to organisation and implementation include...
a) The selection of facility sites.
b) The selection of durable equipment.
c) The selection of distribution parties.
d) The allocation and positioning of resources.
e) The selection of carriers.
Strategic decisions are generally based on...
a) Disaggregated data.
b) Aggregated data.
c) No data atall.
d) Raw data.
e) Very detailed data.

3 Page 3

▲back to top


Which of the following is NOT a transforming resource?
a) Labour
b) Facilities
c) Consumables
d) Capital
e) All of the above are included
Which of the following is NOT a type of process?
a) Job shop
b) Batch
c) Project
d) Continuous flow
e) Repetitive process
Which are the four main areas to be considered in designing a value-adding system?
a) Technology, capacity, supply chain configuration, cost
b) Technology, customer involvement, supply chain configuration, flexibility
c) Quality, technology, customer involvement, supply chain configuration
d) Quality, technology, customer involvement, flexibility
e) Quality, customer involvement, supply chain configuration innovation
The position of inventory in the stages of operations can be classified as:
a) Raw materials
b) Finished goods
c) Work-in-process (WIP)
d) Both b) and c)
e) All of a), b) and c)
10. Capacity planning strategies are:
a) Lead strategy
b) Lag strategy
c) Match strategy
d) Both a) and b)
e) All of a), b) and c)
11. The four categories of quality costs include all the following EXCEPT:
a) Internal failure costs
b) Appraisal costs
c) Supplier costs
d) Prevention costs
e) External failure costs

4 Page 4

▲back to top


12. Costs of measuring, testing and analysing materials, parts, products and the productive
process is referred to as:
a) Prevention costs
b) Appraisal costs
c) Internal failure costs
d) External failure costs
e) Improvement costs
13. Which of the following is incorrect about the cost of quality?
a) Cost of quality is actually the cost of poor quality.
b) Increasing prevention cost increases appraisal, internal and external failure costs.
c) Training cost is an example of a prevention cost.
d) Warranty is an example of an external failure cost.
e) Both b) and d)
14. Internal failure costs include all of the following EXCEPT:
Scrap costs
Rework costs
Architect costs
Avoidable process losses
None of the above
15. According to Goldratt:
a) An hour lost at the bottleneck is an hour lost in the entire system.
b) A product coming out of a non-bottleneck is precious and should not be wasted.
c) Maximising the efficiency of all resources would generate money for the company.
d) Utilization, productivity and operating expenses are the three vital metrics of a process.
e) None of the above
16. A bottleneck is defined as:
a) The transformation of WIP into finished goods
b) The convergence of several separate stages in a process
The end of an assembly line
Any system resource that has insufficient capacity to satisfy the system requirements
None of the above
17. JIT systems rely on
a) Excess capacity
b) A level master schedule
c) Working with customers and suppliers to reduce uncertainty and complexity
d) Both b) and c)
e) All of the above

5 Page 5

▲back to top


18. What are the two primary requirements for the design of the facility?
a) Consumer needs and location
b) Consumer needs and growth forecast
c) Growth and forecasting
d) Location and forecast growth
e) Location and cost
19. Which is the more cost-effective way of increasing the storage in a facility?
a) Expanding the floor area of the facility
b) Having no demarcations in the facility
c) Using the vertical height
d) Purchasing additional storage from another specialised facility
e) Removing some of the loading doors
20. Should the temperature-controlled area determine the layout of the facility in all cases?
a) Yes, as the cheapest method of creating a temperature-controlled area is to use the
external walls.
b) Only when the temperature-controlled area is located within the building.
c) No, the flows and layout within the facility should determine the most effective layout.
d) (a) and (b)
e) None of the above

6 Page 6

▲back to top


SECTION B
[60 MARKS]
QUESTION 2— ESSAY STRUCTURED QUESTIONS
2.1 The way in which a company deploys its operational resources determines how successful the
strategy will be to achieve its performance objectives. Discuss the five key operations
performance objectives? [10]
2.2 Describe the concept of operations management and the decision-making activity in
Operations as consisting of the framework with responsibility areas? [20]
2.3 Most modern businesses rely on comprehensive packaging systems to deliver their products
and manufactured items to consumers in a timely manner. What are the benefits offered to
manufacturers and consumers through the role of packaging in logistics? [10]
2.4 Effectiveness and success in the provision of customer service require continuous monitoring.
In this respect, discuss the time components of customer service that suppliers and logistics
service provider should continually test, which are critical to customer satisfaction? [20]
Pre-transaction elements
END OF EXAM